RE-2010 rotary evaporator mainly used for continuous distillation of a large amount of volatile solvent under negative pressure. Especially for the concentration of extract liquor and distillation of receive liquid when chromatograph, it can isolate and purify reaction product. In reduced pressure condition, when solvent distillation, distillation flask in continuous rotation, the distillation flask is a pyriform or round-bottom flask who is connected to vacuum pump by a snakelike condenser pipe, the other open mouth of condenser pipe is connected to receiving flask to receive evaporated organic solvent. There is a three-way valve between condenser pipe and vacuum pump, when system connect to air, take down distillation flask and receiving flask to transfer solvent. Please reduce pressure first before rotate distillation flask; and please power off first before connect to air, to prevent the rotating distillation flask from falling off. Thermostatic water bath is the heat source for distillation.
RE-2010 rotary evaporator mainly used in medicine, chemical engineering,biopharmacy industries for the concentration, crystallization, drying, separation and solvent recovery, especially suitable for concentrate and purify high temperature easily decomposed material.
High-efficient double condenser ensures high recovery rate.
Newest research rotary evaporator. Heating kettle is made from Teflon recombination material, whole sealing heating mode to prevent dry running, which is applicable of water and oil.
Digital display of both rotary speed and temperature is clear and convenient. Electronic stepless speed regulation operates stably; Humanized operation system makes it easy to handle.
Teflon and fluororubber are double sealed to maintain high vacuum.
|Support Material||Aluminium Alloy|
|Inner Container Material||Aluminium alloy + Teflon recombination pot, whole sealing heating|
|Rotary Bottle Volume||1L 24#standard port(optional 500-3000ml)|
|Receiving Flask Volume||1L 35# ball milling port|
|Evaporation Ability||20ml/min (water)|
|Bath Kettle Temp. Control Range||0-99℃|
|Temp. Control Accuracy||±1℃|
|Lifting Stroke||100mm+150mm(sliding lift + manual lift)|
|Overall Dimension (mm*mm*mm)||550*400*(780-1040) Length*Width*Height|
|Package Dimension (mm*mm*mm)||720*525*385|
|Package Weight (KG)||20|
|Speed Regulation Mode||Stepless Speed Regulation|
|Temperature Display Mode||PT100 Sensor Digital Display|
|Temperature Control Mode||Intelligent Temperature Control|
|Sealing Mode||Bothway sealing by Teflon + Fluorine Rubber|
|Lifting Mode||Manual weight balancing|
|Condenser||Vertical type condenser 85*430mm, inclined condenser is choosable|
|Continuous Charging||19# charging valve|
|Splash-proof Function||Organic Transparent Cover|
|Safety Function||Overload Protection (fuse)|
|Our company’s laboratory glass and laboratory instruments are independent research and development, available for custom-made according to client requirements.|
|Electric Cabinet||1||Recycling Bottle||1|
|Special Sealing Ring||1||Condenser Pipe||1|
|Sealing Gasket||1||Suction Pipe||1|
|Bottle Clamp||2||Charge Pipe||1|
|Protective Pipe 3A||1||Protective Pipe||1|
|Thermostat Water Bath Kettle||1||Special Components (additional Purchase)|