RE-100L rotary evaporator is an exclusive research and developed large-size rotary evaporator of our company, designed for the purpose of mass production need. It is a pioneer of China’s large-size rotary evaporator, and filled up the blank of 100L rotary evaporator in China. RE-100L’s main energy is equipped with universal wheel, which makes it movable, bath kettle can automatic up and down, speed regulation and temperature control center on main engine table, greatly convenient to handle. The brushless electric machine makes it safe and low noise. The equipped double condenser (Because this rotary evaporator works under vacuum condition, and contact segment all adopt high temperature resistance material-high borosilicate glass and PTFE material, it is especially suitable for heat reactive material and material which is corrosive to stainless steel’s concentration, crystallization, separation and solvent recovery.ain and vice condenser) has better condensation effect and higher recovery rate.
The maximum capacity of the rotating lab flask of scientific instruments RE-100L rotary evaporator is 100L, the maximum capacity of the receiving lab flask is 50L, the rotating speed is 0-90r.p.m., and the motor power is 300W.
Flange connection make it easy to dismount with high fastening strength.
The motor possesses silence design and optimal experiment environment.
Heating kettle is applicable for both water and oil, digital thermostat control and manual up and down, closed resistance wire heater, temperature control by K type transducer.
Adopt main and vice efficient condenser,there has automatic switching device between vice condenser and receiving bottle.
|Support Material||stainless steel|
|Shell Material||Antisepsis Plastic Spraying 820*8240mm|
|Inner Container Material||stainless steel 795*330mm|
|Volume of Rotary Lab Flask||100L ¢180 flange aperture|
|Volume of Recycling Lab Flask||50L ¢40 sphere aperture|
|Rotating Power||300W 220V/50Hz|
|Heating Power||12KW 380V/50Hz|
|Temperature Control Range of Bath Kettle||400℃|
|Up and Down Distance||180mm|
|Shape Size(mm*mm*mm)||1700*850*2600 mm|
|Package Weight (KG)||400|
|Function Allocation||Speed Adjustment Mode||Electrodeless Speed Regulation|
|Rotate Speed Display Mode||LED Display|
|Temperature Display Mode||Digital Display K Type Sensor|
|Temperature Control Mode||Smart Temperature Control|
|Sealing Mode||PTFE Sealing|
|Condenser||Vertical efficient three reflux condenser, main condenser 230*950, assistant condenser 230*530|
|Up and Down Mode|
Main Engine Automatic Lifting
|Continuous Charging||29# Standard Aperture Feeding Valve|
|Vacuum Display Mode||Vacuum Meter|
|Continuous Collecting||Check valve control|
|Machine Part||Glass Part|
|Nose||1 set||Rotary bottle||1 unit|
|Floor shelf||1 set||Recycling bottle||1 unit|
|Aluminum Backing Ring of Assistant Condenser||1 unit||Main rotavapor condenser||1 unit|
|Vacuum meter||1 pc||Air conduction bottle||1 unit|
|Rotary nut||1 set||Feeding Valve||1 unit|
|Assistant condenser nut||1 set||¢60 flange tap||1 unit|
|PTFE sealed joint sleeve||1 set||24# vent valve||2 units|
|PTFE feeding valve with flange plate||1 set||19# vent valve||1 unit|
|Check valve||1 set||Rotary shaft||1 unit|
|Aluminum Backing Ring of recycling bottle||1 unit||Assistant Condenser||1 unit|
|¢60F4 pad||3 units|
|¢80F4 pad||1 unit|
|Big black hat||3.5 sets|
|Water bath kettle||1 unit|
|Condenser pipe clamp||1 unit|
|The final interpretation of this operation manual is reserved by our company. If any change in product, please be subject to the real product. The operation manual will not be changed.|
Package & Delivery
- Provide 24-hour technical consultation and reply;
- Provide professional quotation information;
- Provide detailed product performance specification;
- According to product’s using condition, technicians will offer rationalization proposals to assist clients to select proper product types;
- Provide other corollary equipment according to client requirements.
- With supervision from the source of products, the qualified rate of raw materials entering the factory can reach 100%;
- Whole manufacturing process are in strict accordance with promised procedure requirements, product qualified rate can reach100%;
- Provide product’s inspection record of key junctures to customers;
- Provide production schedule photos to customers at regular intervals;
- Package and transport of products are in strictaccordance with the export standard;
- Provide transportation schedule information to clients timely.
- Provide targeted installation video;
- Under the premise of correct installation, normal maintenance and using, we guarantee one-year warranty period;
- When warranty period has expired, our sold products enjoys lifetime guarantee repair, we only charge cost price for changing product’s standard component and sealing component;
- During installation and adjustment period, our after-sale service staff will communicate with customers frequently to know product’s running state in time. Assist customers to install and adjust products until customers are satisfied;
- If product has malfunction during operation period, we’ll offer you satisfied answer in time. We’ll reply you within 1 hour and provide solution or send staff to spot within 24 hours after receiving maintenance notification;
- Lifelong free technical support. Conduct satisfaction survey and inquiry equipment running condition to clients by telephone or e-mail semiannually from the first day of equipment running, put on records of acquired information;
- Provide assistance in solving problems such as equipment damage in the transport.