Professional Rotovap Manufacturer

rotovap@lanphan.com

+86-371-67447999

What Are the Factors for the Accuracy of Elevating Glass Reactor?

2018-02-13 15:50:00
admin
Original
63
Summary :Elevating glass reactors are widely used in fields of biological, chemicals, and medicals. According to the operation regulations, it can conduct vacuum stirring reaction under the conditions of normal or negative pressure.

Elevating glass reactors are widely used in fields of biological, chemicals, and medicals. According to the operation regulations, it can conduct vacuum stirring reaction under the conditions of normal or negative pressure. Besides, elevating glass reactor can conduct distillation of solvents. After the reaction, the materials can be released from the bottom of the tetrafluoro discharge valve. What are the factors for the accuracy of it? There are 5 aspects in total:

1.The insulation layer of elevating glass reactor
2.The configuration of the elevating glass reactor
3. The joint position of the elevating glass reactor
4.The temperature source of elevating glass reactor

5. The temperature configuration and power of elevating glass reactor

During the operation of elevating glass reactor, if you encounter the following faults, please solve it according to these suggestions.

  • Turn on the power switch to find the indicator light is not bright. It may be out of the power supply or bad contact. Please check the power and socket for troubleshooting.
  • The short circuit of the insurance pipe. Please set the power switch to OFF and replace the safety pipe.
  • The power indicator light is bright, but the instrument does not turn. This may be the rotating shaft rusting, please stop using and contact us. The failure of the motor and electric box may be not connected to the seven core plug.
  • If there is damage to glassware or turning switch, the vacuum condition may disappear during the operation. Please check the glassware or replace the switch.
  • There is a vacuum but it can't be pumped up. It may be the reason that the sealing ring is worn and the leakage of the vacuum switch. Please replace the seal and switch.

If you have any other questions, please contact us.

Write a Comment
Comment will be posted once reviewed.
News Category

Telephone

+86-371-67447999

Fax

+86-371-67447888

Email

rotovap@lanphan.com

Address

Room801, Building B, CC Mall, Jianshe Road, Zhongyuan District, Zhengzhou, Henan, China